A strong DC water pump with tubing that can be used for all sorts of projects.
This DC water pump operates at 6V-12V of power and can deliver up to 100ml per minute. We use this component is our Automated Plant Watering System project, you can check out the guide here. Also included is a 48 inch strip of rubber tubing which can be cut apart for use in your project.
The plastic molding around the pump allows it to lay flat on a table or use the screw holes to securely mount it. Connect the rubber tubing to the two rubber connectors coming out of the pump.
To power the motor attach wires to connectors on the backside of the motor. We recommend using a 9V battery to power this pump.
When using this motor with a Bit Board or Robotics Board please be sure to use a Relay Module and a 9V Battery.
Important Motor Details
- Input Voltage: 6-12V DC
- RPM: 2500-5000 RPM
- Water Flow: 100ml per minute at 12V
- Wire Length: None.
- Tubing Length: 48 Inches
