LEGO Compatible Motor

LEGO Compatible Motor

$6.00
$6.00

Add a simple motor to your next LEGO project!

This handy motor is designed to work in any LEGO compatible environment. It features male and female brick studs as well as two axel mounting holes for easy building. Instead of a standard motor shaft we instead have a standard axel mount. This means you can easily plug gears, wheels, and other axel mounting pieces directly to the motor! No need for an adaptor. 

To power this motor you'll need a power supply between 3-5V. We recommend using a 2AA or 2AAA battery pack for power. We DO NOT recommend using a CR2032 battery, as the motor will drain it within a few minutes. For the same reason we DO NOT recommend directly powering this component from a microcontroller as it may draw too much power and hard your microcontroller.

This part also comes with a special Crazy Circuits 2 Pin Header Chip which allows you to easily plug into the Crazy Circuits System. You can also strip the connector off the end of the motor and use a Screw Terminal Chip, but we find the 2 Pin Header to be a much easier solution. 

This part is also called a "GeekServo or 360 degree Geek Servo", through it is most certainly NOT a Servo. If you need a servo try out this instead.